AP SCREEN CHANGER
Manual continuous and self-cleaning screen changer for low-contaminated materials
AP is the perfect screen changer for low-contaminated materials. AP screen changer is entirely made in Italy by Cofit; AP is a patented product.
+39 0331 1496674
INFO@COFIT.COM
MON - FRI 8:30-13:00 , 14:00-17:30
Menu
HOW AP WORKS
AP is a self-cleaning screen changer. The AP filtering cartridges are cleaned or replaced without production cycle interruption; your extrusion system will reach and maintain extreme stability during the extrusion run, your manufacturing process will reach top quality.
TWO PARALLEL FILTERING CARTRIDGES
The AP screen changer incorporates two parallel filtering cartridges that are automatically cleaned one by one, an exclusive Cofit patent, without being taken out of the equipment. While a cartridge is in cleaning mode, the melt flows uninterruptedly through the second filtering cartridge. And your extrusion line is never stopped!
Screen replacement is required only periodically. Screen replacement is done without interruption of the extrusion process.
AP ADVANTAGES
- Robust and reliable
- No hydraulic or pneumatic systems involved
- No control panel required
- Any level of filtration supported
- Virtually no maintenance
- Operating pressure values up to +500 bar
- The cheapest Continuous and Self-Cleaning solution available on the market
Aside from being economical, AP screen changer is highly durable investment for your low-contaminated materials:
- SELF-CLEANING: Protected by exclusive Cofit patent, AP filter cartridges get cleaned without being taken out of the block.
- CONTINUOUS: AP filtering cartridges can be cleaned and replaced without production interruption.
- CHEAP: AP screen changer does not require any expensive control panel or hydraulic control units. Maintenance and spare parts are reduced to the minimum.
THE CHEAPEST SCREEN CHANGER FOR UNINTERRUPTIBLE EXTRUSION SYSTEMS
In many plastic extrusion processes, it is crucial to keep extruders running 24/7, while limiting ordinary maintenance to the minimum.
We are well aware that your filtration system, once started, must be run and not stopped for a long, long time. Cofit AP Screen changers are specially made to that end.
AN ENHANCED, UNINTERRUPTABLE, LONG-LASTING and USABLE SCREEN CHANGER
AP Screen changers have been redesigned from previous version, and involve the introduction of important technological innovations, with great attention paid to usability.
AP screen changers are the visible results of new layouts and upgraded internal concepts. AP screen changer provides for clean up of the filter cartridges without their removal, and without interruption of the extrusion process.
A solution that makes it possible to run your materials without extrusion run interruption.
A SOLID, RELIABLE, DURABLE INVESTMENT
Cofit AP screen changer is solid, reliable and durable. And it is cheap, too, if compared with other continuous equipment. AP screen changer is made from a steel body for low maintenance, and trouble-free lifecycle. There are no moving parts to be driven by hydraulic or pneumatic power units; nickel plating provides high protection against wear.
TECHNICAL DATA
Processing: |
Continuous flow – Self-cleaning |
Filtering area: |
Up to 1010 cm² (156 in²) |
Material status: |
Very suitable for low contaminated materials |
Hourly capacity: |
Up to 1.300 kg/h (2.866 pounds) |
Machined products: |
BOPP, BOPET, PE, PP, ABS, PET, Nylon, PA, PS, etc. |
Applications: |
Cast film, Blown film, Filaments, Nonwoven, Spunbond, Wire & Cable, Pipes, Technical articles and more |
AP 3D ANIMATION
Watch an AP 3D animation: the filtering unit, valves and gaskets, inside AP body, self-cleaning operation
AP VALVE SET-UP
AP set-up: watch how to execute gasket replacement.
TRAINING
When a AP screen changer is set up and ready to start, we take care of your personnel training.
Cofit deals with research, engineering, manufacture and distribution of automatic and continuous screen changers for post-consumer and post-industrial recycling materials, too.
Contact us to test your materials with our screen changers, download 3D schemes of our products, contact us to upgrade your extrusion system, ask us for more info about any product; follow us on Linkedin and Twitter.